Outdoor Master Vortex Pro - 20 PSI Rechargeable Electric SUP Pump

Rechargeable, portable, and built for accurate high pressure. The Vortex Pro is a dual-stage electric iSUP pump with an internal battery. Set your PSI and it inflates to a true 20 PSI, then stops automatically at your target.

What makes this pump good

• Rechargeable power – internal battery for cordless inflation away from a power source.
• Dual-stage motor – high-volume fill, then high-pressure finish accurately up to 20 PSI.
• Anti-glare display – 50% larger, high-contrast screen with bold fonts for easy PSI reading in bright conditions.
• Cooling airflow design – quad-port heat dissipation helps prevent overheating, extends pump life, and keeps performance reliable.
• Fast charging – USB-C PD input supports up to 45W charging.
• Set-and-stop control – digital pressure selection with auto shut-off at the number you choose.
• Inflate and deflate – handles setup and pack-down with one unit.
• Adapter kit included – covers Halkey-Roberts (H3/HR) and other common fittings.

Real-world performance

Dual-stage inflation moves high air volume first, then builds pressure to reach 20 PSI. A 10’6″–11′0 board (around 240–300 L) typically takes about 9–12 minutes using the internal battery. Times vary with board volume and ambient temperature.

Features & specifications

• Dual-stage inflation (high volume → high pressure)
• Internal rechargeable battery
• Quad-port cooling airflow
• 50% larger, anti-glare digital display (PSI/BAR) with auto shut-off
• USB-C fast charge (up to 45 W)
• Inflate & deflate modes
• Nozzle adapter set (incl. H3/HR for iSUP)
• CE • UKCA • RoHS • REACH • WEEE

Inflation time and performance depend on board volume and ambient temperature.

What’s in the box

• Outdoor Master Vortex Pro rechargeable SUP pump
• Carry bag
• USB-C charge lead (fast charge compatible)
• Reinforced hose
• Nozzle adapter set (incl. H3/HR)
• User guide

Setup tips

• Check the iSUP valve is in the inflate position.
• Set your target PSI before you start.
• Fit the hose securely with the correct nozzle and seal to avoid small leaks.
• Charge fully before cordless use.
• Use deflate at the end to remove residual air and make roll-up neater.

FAQ

Can I use it without mains or a car socket?

Yes. The Vortex Pro has an internal rechargeable battery for cordless inflation.

How many boards per charge?

Battery runtime depends on board volume and target PSI. Larger boards and higher pressures reduce the count.

What’s the max PSI?

20 PSI (1.38 bar).

Will it over-inflate?

No. Set your PSI and the pump stops automatically at that pressure.

Which valves does it fit?

Compatible with Halkey-Roberts (H3/HR) via the supplied adapter, plus other fittings using the included nozzles.

How should I store the Vortex Pro?

The Vortex Pro has complex internal circuit boards and battery, treat the Vortex Pro in the same way you would a laptop or other electrical equipment. Be careful not drop the pump and do not expose it to long periods of low temperatures. (Avoid storing it in the garage or other cold areas during winter).

Our take

Battery-powered 20 PSI inflation with faster charging, a clearer anti-glare screen, and cooling that’s designed to last. If you want portable setup and simple, accurate control in a smaller, 2.1 kg package, the Vortex Pro is a solid choice.