Range Rover L322 Front Upper Control Arm Inner Bushings

Range Rover L322 Front Upper Control Arm Inner BushingsThese urethane performance bushings replace the stock front rubber upper inner control arm bushings on the 2002 2012 Range Rover models. Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn as the bushing deflects more than it should. You get sloppy steering, vibrations, and poor handling which makes the vehicle feel unstable. These urethane bushings are stiffer than stock rubber and will

These urethane performance bushings replace the stock front rubber upper inner control arm bushings on the 2002-2012 Range Rover models. Stock rubber control arm bushings give a disconnected and mushy feel to the front suspension, especially when worn as the bushing deflects more than it should. You get sloppy steering, vibrations, and poor handling which makes the vehicle feel unstable. These urethane bushings are stiffer than stock rubber and will not deflect as much. This helps keep the alignment in check with less variation. The vehicle feels more planted and confidence-inspiring. And a limited lifetime warranty means you'll likely never have to pay for another bushing ever again.Sold as a pair for the Range Rover front upper control arm (see diagram). Replaces Range Rover part number LR018345.Unlike other urethane bushings using only one or two urethane grades, Powerflex design engineers choose the correct hardness to allow for the specific movement or rigidity required for each component while minimizing unwanted NVH. Bushings are typically produced in one of three grades – Yellow (70-80A, approximately 25% stiffer than stock), Purple (80-90A, approximately 30% stiffer than stock), and Black (90-95A, approximately 80% stiffer than stock).

Diagram Reference #1

This part fits the following models:
Land Rover
Range Rover L322 (2002-2012)