Magura - HC1 Clutch Radial Master Cylinder

Magura - HC1 Clutch Radial Master CylinderMagura HC1 Radial Master Cylinders Master Cylinder Includes: Banjo bolt with sealing rings (M10x1) Remote Reservoir Standard clamp (without mirror mount) Brake light or start safety switch ABE for brake fitments Owners Manual TECHNICAL DETAILS 70 RADIAL DESIGN Pushrod and cylinder at 70 angle to handlebar results in decreased friction and more direct brake feeling for improved control. FULL ABS COMPATIBILITY MAGURA HCT is approved for continuous use

 Magura - HC1 Radial Master Cylinders

Master Cylinder Includes: 

Banjo bolt with sealing rings (M10x1)

Remote Reservoir

Standard clamp (without mirror mount)

Brake light or start safety switch

ABE for brake fitments

Owners Manual

TECHNICAL DETAILS

• 70° RADIAL DESIGN Pushrod and cylinder at 70° angle to handlebar results in decreased friction and more direct brake feeling for improved control.

• FULL ABS COMPATIBILITY MAGURA “HCT” is approved for continuous use with all ABS systems without loss of performance due to pressure compensation (ABS-Kickback).

 • ADVANCED SECONDARY SEAL TECHNOLOGY The rear piston seal has been specially designed to prevent the introduction of air through secondary seal ingress. The advanced X-Ring seal design will reduce or eliminate this problem common on racing motorcycles at higher RPM.

• RESERVOIR MOUNT The master cylinder is supplied with an external reservoir and mounting bracket designed to use minimum space and with smoked glass to optically determine the level and condition of the brake fluid at all times.

CLUTCH MASTER

• Piston diameter 16 mm, long lever blade

• Piston diameter 13 mm, long lever blade

• Piston diameter 12 mm, long lever blade