Weld-On Jack Points

Weld-On Jack PointsWeld on Jack Points create the most secure connection available on the market giving you total confidence and an unmatched level of safety every time you lift (thanks to our patented design). Weld them directly to your chassis or suspension and your vehicle will lock solidly into place when lifting. The diamond shaped face allows up to 12 degrees of misalignment between the Jack Point and your AGM jack. That means sliding the jack into place is quick

Weld-on Jack Points create the most secure connection available on the market - giving you total confidence and an unmatched level of safety every time you lift (thanks to our patented design). Weld them directly to your chassis or suspension and your vehicle will lock solidly into place when lifting.

The diamond-shaped face allows up to 12 degrees of misalignment between the Jack Point and your AGM jack. That means sliding the jack into place is quick and forgiving, without needing a perfect lineup. As the vehicle lifts, it also lets the jack move naturally, reducing stress on both the jack and the chassis—while still locking in securely so there’s no chance of slipping. It’s the safest, most reliable way to lift your vehicle, whether you’re working in the garage or tackling repairs on the trail.

Sold individually or in 4-packs.

NOTE: Your vehicle weighs thousands of pounds, which means there is a lot of force on a very small area. Always lift on flat ground, keep the vehicle in park/gear, and chock your tires (rocks, tools, or spare tires work in a pinch). Safety first, always!

NOTE: Each Weld-on Jack Point includes extra material on the backside so you can contour it to fit your chassis or suspension. To measure how much material you can remove:

• Place the Weld-on Jack Point into your jack.

• Mark with a Sharpie the material that sticks out beyond the face of the jack - Leave an additional .125–.250" of space past your sharpie mark for the weld bead.

• This area .125"-.250" past your sharpie mark is the area on the backside of the Jack Point that you can sand and shape to fit the contour of your suspension or chassis components to ensure a tight fit before welding. 

If you have questions about installing your Jack Points, call or email us before sanding - we’re happy to help.