Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 10 - Jul 15
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Legion LT-100MV Steam KettlesLegion LT 100 Stationary Direct Steam Kettle with 2 Speed Mixer 100 gal 2 3 Jacketed 304 Stainless Steel Made in the USA Built for high volume, high yield production, the Legion LT 100 stationary kettle combines a seamless, deep drawn 304 stainless vessel with a powerful twin shaft agitator. From creamy chowders to thick caramel, the LT 100 delivers uniform cooking, efficient mixing and years of trouble free service. Kettle Highlights 100 gallon (379
Legion LT-100 | Stationary Direct Steam Kettle with 2-Speed Mixer – 100 gal
2/3 Jacketed • 304 Stainless Steel • Made in the USABuilt for high-volume, high-yield production, the Legion LT-100 stationary kettle combines a seamless, deep-drawn 304 stainless vessel with a powerful twin-shaft agitator. From creamy chowders to thick caramel, the LT-100 delivers uniform cooking, efficient mixing and years of trouble-free service.
Kettle Highlights
- 100-gallon (379 L) working capacity – ideal for commissaries, schools & central kitchens
- Seamless 304 SS kettle liner eliminates interior welds and sanitation “catch points”
- 2/3 steam jacket (304L) for rapid, even heat transfer
- Certified 25 psi operating pressure
- 2″ 304 SS compression draw-off valve with perforated ¼″ strainer disk
- One-piece, actuator-assisted 304 SS domed cover (easy lift & self-balanced)
- Four 2″-diameter leg assemblies with reinforced cross-bracing & adjustable flanged feet
- ASME-constructed & NSF-listed; fabricated in Waynesboro, Georgia
Integrated MV Twin-Shaft Agitator
- Totally-enclosed gear motor, factory set for two operating speeds (Low: 23/60 RPM • High: 46/120 RPM main/secondary)
- High-torque 2 HP (high) / 1 HP (low) drive handles dense sauces & delicate creams alike
- 304 SS anchor-style main agitator hugs kettle wall for complete scraping
- Counter-rotating 304 SS secondary beater promotes thorough product movement
- Removable nylon scraper blades prevent scorching and are dishwasher-safe
- Bayonet-mount shafts lift out with an actuator-assist arm for quick cleaning or kettle-only use
- Positive rim-lock & safety interlock block high-speed starts unless mixer is fully engaged
Why Operators Choose Legion
- Deep-draw fabrication yields stronger, lighter kettles with superior sanitation
- All-stainless construction—inside, outside, legs and fittings—resists rust & harsh cleaners
- Field-proven since 1946; supported by nationwide parts & service network
- Customizable with faucets, strainers, baskets and security packages (sold separately)
At-a-Glance Specs
| Capacity | 100 gal / 379 L |
|---|---|
| Kettle Material | Seamless 304 SS liner, 304L 2/3 jacket |
| Operating Pressure | 25 psi (direct steam) |
| Agitator Drive | Twin-shaft, two-speed gear motor (2 HP / 1 HP) |
| Agitator Speeds | Low: 23 RPM main / 60 RPM secondary High: 46 RPM main / 120 RPM secondary |
| Draw-off Valve | 2″ compression, 304 SS, w/ ¼″ perforated strainer |
| Support | (4) 2″ Ø 304 SS legs with adjustable flanged feet |
| Cover | One-piece, domed, actuator-assisted stainless steel |
| Certifications | ASME, NSF |
Steam supply, electrical connection for mixer and any optional accessories must be installed by qualified personnel and conform to local codes. For dimensional drawings, utility locations and accessory compatibility, please refer to the factory engineering print or contact our team.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.3 ★★★★★
Based on 1965 reviews
Sort
Product Reviews
★★★★★ 5
Excellent Car Sound Deadening and Heat Insulation Solution
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
If you're looking for a high-quality car sound deadening and heat insulation material, then the Siless Liner 157 (4 mm) mil 36 sqft is definitely worth considering. This product is designed to offer superior noise reduction and heat insulation for your car, making your driving experience more comfortable and enjoyable.
The closed-cell foam material used in this product is of premium quality, and it effectively blocks out external noise and vibrations. This means you can enjoy a quieter and more peaceful ride, even on noisy roads. In addition, the Siless Liner 157 also provides excellent heat insulation, which can help keep your car cooler in hot weather.
One of the best things about this product is that it's very easy to install. You don't need any special tools or equipment, and the material can be easily cut to fit any shape or size. It's also very lightweight and flexible, which makes it easy to work with.
Overall, the Siless Liner 157 (4 mm) mil 36 sqft Car Sound Deadening Closed Cell Foam & Heat Insulation mat is an excellent choice for anyone looking to improve the comfort and performance of their car. It's a high-quality product that delivers on its promises, and it's definitely worth the investment.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 12, 2023
★★★★★ 4
Heavy-Duty That Works!
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
This extreme sound deadening mat performs well for reducing road noise and vibration. It feels dense and adheres securely when properly applied. Once installed, it noticeably improves interior quietness.
Overall, it’s a strong choice for more serious sound insulation projects.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 12, 2026
★★★★★ 5
Good product, quite sticky I must say.
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
Worked for my van insulation
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 1, 2026
★★★★★ 5
Good stuff
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
Good stuff, easy to use, self adhesive backing contours around curves easily and works great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 29, 2026
★★★★★ 5
Works amazingly, but only if you install it correctly.
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
If you purchasing Siless Liner 157 mil (4 mm) Sound Deadening mat, to block unwanted sounds in your car, this is what you need to buy. But wait! It's not the only thing you need to buy if you want to "actually" deaden sound.
By itself, it will definitely block a noticeable amount of sound, and, most likely, that's all you realistically need. But... But... If you want the Siless Liner Sound Deadening Mat to really help you take it up a few notches, to get the best sound almost bordering on soundproofing, listen up.
You will have to install traditional butyl rubber first. Doesn't have to be the Siless brand, but I'm sure they would love to sell both to you, I used both Killmat (80mil) and Noico (50mil).
I have a Honda S2000. It's a two-seater convertible sports car if you don't know what this car is, and it's loud when I'm driving above 60mph. I also happen to have a sound system installed as well. Other than that, the car is stock. I first installed the butyl rubber on the car's interior sheet metal. I went all out and covered everything I could. I didn't need to but I wanted to. I was extremely impressed with the results. But I wanted to go further. Not because I needed to but because just wanted to see what it would be like.
So I bought Siless Liner 157 mil (4 mm) 36sqft Sound Deadening mat to go on top of the butyl rubber mats. I put this over every area I installed the butyl rubber. I had to be careful of clearance issues since I added a significant amount of underlayment, and you should too.
If you put butyl rubber sound-deadening materials in 50% of the total interior area, you'll hear a noticeable improvement. If you put butyl in about 80% of the total area, you'll be even more amazed at the improvement, compared to before.
I originally did all the above myself, so that's my experience and so your mileage may vary.
I then installed the Siless Liner Sound Deadening mat over every place I could even going further than I could with the butyl rubber. I used the Siles Liner in areas where butyl rubber would not have been effective, such as the roll bar hoop area and large empty cavities or holes.
I covered everything I could, firewall, doors, floor pan, transmission tunnel, trunk, trunk lid, fuel tank area, rear quarter panels, and rear-wheel tunnels, in Siless Liner Sound Deadening Mat.
WOW!! The Siless Liner Sound Deadening Mat was the icing on the cake! Let's not forget, this car is a convertible sports car so it will never be a quiet ride, ever. But I can now actually have a conversation with a passenger at a normal-ish volume! This also means I can now have a normal hands-free phone call without having to plug one ear to block out the noise! My sound system sounds so much better! Just by going through the install process, I looked for any vibration, rattle, squeak, and noise-prone areas to either eliminate or reduce unwanted noise production. If you forget this step, the inside and outside of your car will rattle and buzz. I skipped this step the first time around. But did it right before I installed more butyl rubber and the improvement was impressive, especially inside the car. Outside the car, I didn't notice a difference until I put the last layer of Siless Liner Sound Deadening Mat. The sound deadening mat works both ways from what I can tell. If I turned up my music, as loud as I occasionally do, parked in the attached garage to the house, with the garage door closed, I would be barely able to tell the car was playing music in the garage. It sounds like it is another car, just a little bit down the street, with a very loud base. If you stand 20 feet away outside the car, the sound system is noticeable, but not obnoxious by a long shot.
Get a 3 piece wood/metal roller set as well, which makes quick work of large areas.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 23, 2021
recommand products
Sunglo Patio Heater Part 30257 S - SLIP COLLAR SG: A242 A265 SS
99.36
Sunglo Patio Heater Part 70036 - BOLT SG: 3/8X 2 1/2" F/A244(V)
19.00
Sunglo Patio Heater Part 70028 - BOLT SG: EYE F/DEC COVER
20.00
Sunglo Patio Heater Part 10278 21 - HEAD ONLY SG: NO EMITTER GRID NG/ DSI/ SMALL BASE
507.64
Sunglo Patio Heater Part 80024 2 - FTG UNION SG: 1/2" BLACK
37.00