QSC E115 2Way 500W Passive Loudspeaker - 15"

QSC E115 2Way 500W Passive Loudspeaker - 15"The E115 is a trapezoidal, two way loudspeaker using a 15 inch, 500W, die cast aluminum frame woofer with a 3. 5 inch voice coil. It is intended for use when high power and authoritative low end are needed from a full range loudspeaker. A 2. 8 compression driver attached to the 75 DMTTMwaveguide assures that even distant listeners will be well covered. E Series loudspeakers will perform very well with any quality, professional power amplifier but by

The E115 is a trapezoidal, two-way loudspeaker using a 15-inch, 500W, die cast aluminum frame woofer with a 3.5-inch voice coil. It is intended for use when high-power and authoritative low-end are needed from a full-range loudspeaker. A 2.8” compression driver attached to the 75° DMTTMwaveguide assures that even distant listeners will be well covered.

E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke. 

Features

• High output, professional quality sound with E115 – 500 W continuous power
• E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers.
• E Series Entertainment System DSP Tunings are now available for PLD, CXD and GXD processing amplifiers:
  • For PLD/CXD visit Amplifier Navigator Software
  • For GXD visit the GXD Firmware Updater
• Titanium diaphragm for high fidelity and long life
• Rugged tour-grade textured paint
• Foam-lined perforated steel grill
• Available U-Style Yoke and M8 rigging kit for permanent installation
• Dual angle pole socket

Specifications:

• Configuration 1 x 15-inch, 2-way, non-powered 
• Frequency Response (-6 dB) 55 Hz – 20 kHz
• Frequency Range (-10 dB) 43 Hz – 20 kHz
• Power capacity1: continuous/peak 500 W / 2000 W
• Sensitivity  97 dB, 1 W @ 1 m
• Coverage Angle 75° conical DMT
• Output2 (peak SPL @ 1 m) 130 dB
• Drivers
  • LF 381 mm (15-inch) driver with 89 mm (3.5-inch) voice coil
  • HF 38 mm (1.5-inch) exit, 71 mm (2.8-inch) voice coil, compression driver 
• Nominal Impedance 8Ω
• Cross-over Full-range only 1.55 kHz 
• Input connectors  2 x NL4, 1 x barrier strip
• Enclosure  Trapezoidal, plywood, black texture paint finish. Two side-mounted handles, Perforated, powder-coated steel grille with foam lining.
• Dimensions (WxHxD) 16.5 x 28.2 x 17.5 in / 420 x 716 x 445 mm
• Net weight 31 kg / 68 lb
• Shipping weight 34 kg / 75 lb