3 Pce INOX Burr Set

3 Pce INOX Burr Set3 Pce INOX Burr Set 6. 35mm (1 4") Shank. Optimised geometry for rapid stock removal when machining stainless steel. Bordo INOX burrs have a unique cutting geometry that reduces heat build up at the cutting edge of the workpiece. In excess of 35% more stock removal compared to conventional burr geometry. Superior stock removal on Ferritic, Austenitic and Martensitic based materials. Harder materials require slower running speeds. Smaller burrs require

• 3 Pce INOX Burr Set
• 6.35mm (1/4") Shank.
• Optimised geometry for rapid stock removal when machining stainless steel.
• Bordo INOX burrs have a unique cutting geometry that reduces heat build up at the cutting edge of the workpiece.
• In excess of 35% more stock removal compared to conventional burr geometry.
• Superior stock removal on Ferritic, Austenitic and Martensitic based materials.
• Harder materials require slower running speeds.
• Smaller burrs require faster running speeds.
• Long shank burrs require slower speeds for safety reasons.
• Apply constant movement and light pressure when using the burr.
• Running below the optimum speed will cause chipping.
• Running above optimum speed will cause premature tooth wear.
• Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
• Using tools and collets which have become worn will cause chipping.
• Do not sink the burr for more than one third of its periphery.