SKU: 58478058887

gitaar gereedschap set 27 stuks wera 9100 ref134015

Sale price$114.55 Regular price$127.28
Save 10%

Pay in installments of $31.82 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 17 - Aug 22

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

gitaar gereedschap set 27 stuks wera 9100 ref134015Gitaargereedschapsset: Deze set bevat al het nodige gereedschap voor onderhouds en reparatiewerkzaamheden. Wera roestvrijstalen inbussleutels met Hex Plus profiel (maten 1,5, 2,0, 2,5, 5,0 en inch maten 1 8", 5 32", 3 16"). Wera roestvrijstalen bits met een lengte van 89 mm voor binnenzeskantschroeven (in de maten 1,5, 2,0, 2,5), Kraftform schacht voor 1 4" bits, 1 4" roestvrijstalen bits voor sleufschroeven (1.,8x12x41 mm, 0,6x3,5x89 mm, 1,2x 8,0x89

Gitaargereedschapsset: Deze set bevat al het nodige gereedschap voor onderhouds- en reparatiewerkzaamheden.
Wera roestvrijstalen inbussleutels met Hex-Plus profiel (maten 1,5, 2,0, 2,5, 5,0 en inch maten 1/8", 5/32", 3/16").
Wera roestvrijstalen bits met een lengte van 89 mm voor binnenzeskantschroeven (in de maten 1,5, 2,0, 2,5), Kraftform-schacht voor 1/4" bits, 1/4" roestvrijstalen bits voor sleufschroeven (1.,8x12x41 mm, 0,6x3,5x89 mm, 1,2x 8,0x89 mm), voor kruiskopschroeven (types PH 1x89 mm en PH 2x89 mm) en voor binnenzeskantschroeven (0,6x8,5x89 mm),05"x25 mm), een Wera adapter voor het handvat (1/4"-hexagon bus van het handvat naar de 1/4" vierkant van de doppen), Wera Zyklop doppen (in de maten 10 en 1/2"), touwslinger met 1/4" zeskant voor aansluiting op het handvat, Knipex tang voor het knippen van touwen, vaste meter, inputjacker, 2 plectrums.

KENMERKEN

  • De roestvrijstalen punt (1,8 x 12 x 41 mm) is ideaal voor het aandraaien van de schroeven die de brug ondersteunen. Roestvrij staal voorkomt de vorming van roest door externe bronnen op roestvrijstalen onderdelen.
  • Met behulp van de "inputjacker"-montagecilinder kan de uitgangsconnector bij montage en demontage veilig worden gepositioneerd; de buitenste zeskantmoer wordt met behulp van de zyklopbus los- en vastgedraaid
  • Gitaarsnarenslinger: de meegeleverde gitaarsnarenslinger kan door middel van de 1/4" zeskant aan de kraftform 815 r greep worden bevestigd; dankzij de ergonomische vorm ligt de greep prettig en veilig in de hand; de kracht kan nauwkeurig en gevoelig worden ingesteld; de slinger is geschikt voor alle mechanische gitaarsystemen
  • Praktische metalen doos voor bijvoorbeeld het opbergen van plectrums; de doos sluit veilig en duurzaam af
  • Haakse moersleutels voor het afstellen van het stalen web binnenin de gitaarhals; de speciale hex-plus geometrie van de haakse moersleutels zorgt ervoor dat het gereedschap beter in de schroef zit, waardoor het risico van wegglijden en beschadiging wordt verminderd en de krachtoverbrenging duidelijk wordt verbeterd

De set bevat

815 R schroevendraaier met bithouder

x1 1/4"x119 mm
3800/1 TS Bits, roestvrij staal
x1 1,8x12x41 mm
3840/1 TS Bits, zeskant, roestvrij staal
x1 0,05"x25 mm
3950 PKL Haakse moersleutels, imperiaal type, roestvrij staal
x1 1/8"x123 mm
x1 5/32"x137 mm
x1 3/16"x154 mm
8790 HMA Zyklop dopsleutel met 1/4" aandrijving
x1 10x23 mm
x1 7/16"x23 mm
KNIPEX 74 01 140 tangen
x1
3851/4 Bits Kruiskopbits, roestvrij staal
x1 PH 1x89 mm
x1 PH 2x89 mm
3800/4 Bits, roestvrij staal
x1 0,6x3,5x89 mm
x1 1,2x8x89 mm
3950 PKL Metrische haakse sleutel, roestvrij staal
x1 1,5x90 mm
x1 2x101 mm
x1 2,5x112 mm
x1 3x123 mm
x1 4x137 mm
x1 5x154 mm
870/1 Vierkante adapter met kogel
x1 1/4"x25 mm
8790 HMA Dopsleutel lang met 1/4" aandrijving
x1 1/2"x50 mm
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 58478058887

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 15 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
E
Verified Purchase
Ed Train
Houston, US
★★★★★ 5
Superior Design!
Size: 6 Pairs / 12 pcs
Delivery was lightning fast. I tried a pack of two pairs of these banana jacks as a sample to see if these would meet my needs. The design of these plugs is superior. The design was exactly what I wanted because the speaker wire is secured with TWO set screws. Then I ordered an additional six pairs of plugs to hook up my subwoofer to my amp and speakers. (I feed the audio output from the amp to the sub. The sub has a crossover that keeps the low frequencies and sends the mid and treble frequencies to my bookshelf speakers.) I love the security of two set screws on each plug and love the barrel that screws on AFTER the wire is secured by the set screws. Most banana plugs have a hole through the shaft of the plug that receives the stripped wire. Then the barrel cover is screwed down to secure the wire in the plug. This design compresses the speaker wire but eventually the cap loses it grip and allows the connection between the wire and the plug to become loose. Then the transfer of the audio signal becomes poor and the speakers sound bad. Every month or two I needed to check all the banana plugs and re-tighten many of them for the best performance. The two set screws eliminate this problem. The set screws are quite small and take a little extra care in installation. You will need a small flat blade screwdriver to tighten them. I used the 1/8" flat blade driver from a set of jewelers screwdrivers. These well made plugs are a bit pricier that many of the banana plugs available but certainly not the priciest plugs available. For me, the slightly higher price was more than offset by the security of the wire within the plug. I'm not thrilled with the extra tight fit of the tip on the plugs into the jacks. It took a lot of effort to insert the in the jack. Actually I "greased" the pins (very sparingly) with with non-corrosion, conductive paste (Ox-Gard, No-Corrode, etc. Do NOT use any other grease.) Next time I'll use pliers to compress the pin. My only quibbles are that the spring pins that go into the jack are very tight and that the plugs are only sold in quantities of two pairs or 12 pairs. I recommend these banana plugs for all who are using the banana plugs and jacks for hooking up your speakers. It's a very convenient way of connecting speakers if your speakers and amplifier have the banana jack as part of the binding post. Further, it's much safer to use banana plugs since the possibility of shorting your amplifier with a stray strand of wire is practically zero. Easy Five Stars.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 13, 2018
V
Verified Purchase
V88
West Palm Beach, US
★★★★★ 5
Top banana
Size: 5 Pairs / 10 pcs
Theses banana plugs are hight quality non magnetic. Banana plugs easy to usexand very high quality sound different because of the better connection and quality.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026
G
Verified Purchase
Gummy Roach
Bozeman, US
★★★★★ 5
Very easy to use
Size: 12 Pairs / 24 pcs
I have an Onkyo audio/video receiver along with an Emotiva amplifier. Both have speaker "post" terminals which will accept banana plugs, OR I can connect the speaker wires by unscrewing the posts, poke the speaker wires into the terminals and then tighten the posts. The problem with poking the wires into the terminals and tightening the posts vs using banana plugs is that there is a risk of the wires touching the metal on the back of the chassis or touching other speaker wires, causing a short if one is not careful. With banana plugs, they simply plug into the back/top of the posts, eliminating the rsick of a short circuit. They can also be unplugged very easily if needed. Banana plugs are DEFINITELY the preferred way to connect speakers to an receiver or amplifier if they have post-style terminals. These particular banana plugs came in a package of 12 I believe. They were very reasonably priced, and simple to connect to the end of the speaker wires. Simply unscrew the banana plugs, use a small, standard jewelry screwdriver and loosen both of the set screws, insert the speaker wire, then tighten the set screws, and then screw the banana plug back together. The plugs have either a red band which would typically be used for your "Right" speakers, or a black band which would typically be used for the "left" speakers. The banana plugs insert into the top or front of the speaker terminal posts on the amp and receiver. They fit VERY snug, and so I did have to apply just a little bit of pressure in order to insert them into the posts, but once plugged in, rest assured they're not going anywhere. They are snug. I highly recommend these.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 2, 2025
L
Verified Purchase
Larry V.
Chelsea, US
★★★★★ 5
Not cheap but also, not cheap!
Size: 2 Gauge Cable, Color: 20 ft Black + 20 ft Red
Came on time, as described and appears to be solid quality.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 14, 2026
H
Verified Purchase
Hank
West Palm Beach, US
★★★★★ 5
Quality & Durability
Size: 2 Gauge Cable, Color: 20 ft Black + 20 ft Red
If you need cable for your power supply and ground. Look no further. This is quality from the copper to the insulation. I wasn't sure about buying wires off amazon but this is my new favorite. Done several trucks and they are holding up just fine.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 1, 2026

recommand products